FLUKE NETWORK INSPECTOR 4.1 PATCH
FLUKE NETWORK INSPECTOR 4.1 PRO
FLUKE NETWORK INSPECTOR 4.1 VERIFICATION
FLUKE NETWORK INSPECTOR 4.1 SOFTWARE

H is height, the vertical distance from the lowest to highest Rechargeable lithium ion battery (installed) or AC powerġ4 x 4.57 x 4.32cm/5.5 x 1.8 x 1.7 inches (H x W x D)Ģ2 x 10 x 5.3mm/9.1 x 4.3 x 2.6 inches (H x W x D)

FLUKE NETWORK INSPECTOR 4.1 PRO

Spectral width, FWHM (full width at half maximum)ġ4.2 x 8.1 x 4.1cm/5.6 x 3.2 x 1.6 inches (H x W x D)įT600 FiberInspector Pro Video Microscope Specifications Single-mode fiber 62.5μm and 50μm multimode fiberĠ.05dB to 50.0dB (selectable in 0.05dB increments up to 10.0dBġ4.5 x 8.0 x 3.9cm/5.7 in x 3.2 in x 1.5 inches MPO interface for 12-fiber, unpinned plugs Test cords, MPO adapters, an AC adapter/battery charger for theįiberInspector Pro, batteries for each device, two carrying InĪddition to the MultiFiber Pro, 850nm multimode light source, andįiberInspector Pro with adapter tips, the kit includes a set of

FLUKE NETWORK INSPECTOR 4.1 PATCH

Patch panel bulkheads without disassembling the panel. Inserted through bulkhead adapters for examining patch cords and The display has a 9cm (3.5') TFT (thinįilm transistor) LCD for viewing end faces. Tips-ST, SC, and universal 2.5mm patch cord tip-for accommodatingĭifferent connector ports. Microscope includes an MPO tip for inspection of MPO connectedįibers and cassettes, and an additional set of probe adapter The FiberInspector Pro video microscope, consisting of a handheldĭisplay unit and probe, magnifies to 200X and 400X for inspectingįiber end-faces to check for contamination or damage. Performance of fiber optic cable in data centers and enterprise Optical power meters are usedīy network technicians to troubleshoot, maintain, and optimize Specifications ( ) include a display resolution of 0.01dB and variousĮnvironmental operating conditions. Off after 10, 20, 30, or 60 minutes of non-use to conserveīattery life and has a low-battery indicator. The meter can be set to automatically power

FLUKE NETWORK INSPECTOR 4.1 SOFTWARE

The software is compatible with Microsoft Windows XP, Vista, andħ operating systems. To a computer for long-term records retention, or for analysisĪnd generation of certification reports using LinkWare software. Stores up to 3,000 test results (the equivalent of 250 MPOĬables), that can be downloaded via the meter's USB 2.0 interface The need for fan-out cords and is shuttered to protect againstĬontamination from dirt and dust. To suit specific applications and an indicator lights when the Loss thresholds for the meter can be adjusted Tested, so that individual fibers that fail test limits areĬlearly displayed. Identifies each fiber within the MPO connector that is being

FLUKE NETWORK INSPECTOR 4.1 VERIFICATION

Source measures power and loss and validates polarity on all 12įibers in an MPO fiber trunk, displaying test results for all 12įibers in six seconds and ensuring end-to-end connectivity withīuilt-in polarity verification per Telecommunications IndustryĪssociation (TIA) standard TIA-568-C.0. Meter with on-board MPO (multifiber push-on) connector and light Microscope for verification and inspection of MPO fiber in dataĬenters and enterprise networks.

MultiFiber Pro optical power meter with on-board MPO connector,Īn 850nm multimode light source, and a FiberInspector Pro video The Fluke Networks MFTK1400 fiber optic cable test kit includes a

Imported from USA (Sizes & Specifications are based on the USA Market).

Kit includes accessories for the FiberInspector Pro (AC adapter/battery charger, probe adapter tips, and carrying case), three sets of MPO test reference cords, two MPO adapters, OneClick Cleaner for MPO connectors, a USB interface cable, a LinkWare PC software CD, a user guide CD, a carrying case, and instructions.

FiberInspector Pro video microscope magnifies to 200X and 400X for inspecting fiber end-faces to check for contamination or damage.

850nm multimode LED light source identifies each fiber within the MPO connector that is being tested.

MultiFiber Pro optical power meter with on-board MPO connector measures power and loss and validates polarity on all 12 fibers in an MPO fiber trunk.

Fiber optic cable test kit with an optical power meter, MPO connector, and other devices for verification and inspection of MPO fiber in data centers and enterprise networks.

Fluke network inspector 4.1